Interior Toilet / Storage kit

(scale approximate)

Please note: this kit requires drilling four (4) 3/16" holes through wood cutting board in order to connect to the frame, and 1/2" countersunk holes halfway to install nut hole covers - here's a video showing how to do it's very easy (drill bits not included; but 4 mounting bolts and covers are, as well as detailed instructions where to mark for holes before drilling)
This module is ideal for storing a van toilet and also utilizing the space for additional storage and top cutting board
Constructed of durable, light-weight anodized 20 series (20mm x 20mm) aluminum extrusion 'T-slot' (*assembly required just tightening hex bolts it's easy)

Pre-drilled bottom 1/4" mounting hole for proper installation to bolt kit to vehicle body for safety (mounting bolt/nut not included because length needed varies depending on your vehicle)
Dimensions = ~14" W x ~17" deep x ~32" tall (*custom heights may be available please contact us)
Weight = the 2020 frame completely assembled + cutting board = approx. 15 lbs.
Approx. assembly time 2.5 hours

The toilet storage space is 16"L x 14"W x 13"H so will fit the following van toilets PartySaving 2.6 gallon and Camco 2.6 gallon (*toilet not supplied)

Aluminum extrusion 20 series needed to assemble a complete kit frame (*shipped separately directly from supplier)
All T-slot bolts/nuts/lock washers and allen wrench
1 top cutting board Camco Hardwood Cutting Board and Stove Topper With Non-Skid Backing 17" x 19-1/2" x 3/4"
Detailed instructions

Power drill and 3/16" bit to drill 4 holes through wood cutting board and 1/2" bit to countersunk holes halfway (bits not included)
Optional to install sound dampening rubber between kit and floor if you're concerned about scratching your floor

Optional storage tote (*not included) of your choosing above toilet as long as less than max inner dimensions of tote storage area = 16"L x 14"W x 13"H